|
|
|
| Campbell Hausfeld 26 - Gallon (Belt Drive) Air Compressor |
|
CAST IRON OIL-LUBE BELT DRIVE 26 GALLONS 10.3CFM @ 90 PSI Cast Iron Twin Cylinder Pump Up to 5,000 hours of life (Based on B-10 Bearing Rating) Quieter Operation Compared to oil-lube aluminum pumps Best Warranty in the Industry 3 Years, three times longer than the competitors MODEL NUMBER VT6271 ...
More
|
|
$490.00 - $627.00
from 5 stores

|
|
| Mcculloch 2800 Psi Gas Pressure Washer - FH2800 |
|
2800 PSI 3.0 GPM 8400 Cleaning Units Powerful 6.5 HP McCulloch commercial series engine Easy Recoil Start 5 Quick-connect spray nozzles Low oil shutdown system Large 10" pneumatic wheels 25 foot heavy-duty hose Two hour run time from one tank of gas Large
|
|
$480.00 - $690.00
from 3 stores

|
|
| Milwaukee Tool 18 Volt Lok - Tor 4 Pack Combo Kit |
|
18 volt 4 pack Lok-Tor series combo kit included in the combo kit, Hatchet Sawzall Counter balanced mechanism reduces vibration with 6-position pivoting handle for use in tight spaces. Orbital action, counter balanced for fast smooth cutting. 6-1/2 In. Circular saw for wood cutting applications. Cut ...
More
|
|
$386.00 - $720.00
from 6 stores

|
|
| Delta Machinery 14" Cast Iron Lathe |
|
With an all ball-bearing 3/4 horsepower induction motor and its electronic variable speed range of 450-2,600 rpm, this lathe is the right choice for beginners and experienced woodworkers. It has the capacity to turn spindles up to 40 In. long and for faceplate turning, the swing over the tool rest b ...
More
|
|
$700.00 - $809.00
from 2 stores

|
|
| Greenlee lee 7806Sb: Tools & Production Supplies Tools |
|
Tools & Production Supplies, Tools, Punches, Hydraulic Punches - GREENLEE 7806SB | TOOLS,PUNCH,HYDRAULIC,HYDRAULIC STRAIGHT PUNCH DRIVER,HAND TOOLS,HYDRAULIC PUNCH DRIVER ,GREENLEE. Newark InOne - a market-leading, knowledge-based distributor of electronic components, stockroom management services ...
More
|
|
$725.00 - $1,147.00
from 3 stores

|
|
| Jet 6" Closed Stand Jointer - 708457K |
|
Jet 6" Closed Stand Jointer - 708457K 6" Closed Stand Jointer Features Powerful 1 HP totally enclosed fan cooled (TEFC) motor Spring loaded front guard and fixed rear guard for maximum protection Dust chute with 4" dust port for efficient dust/chip collection Exclusive front mounted table adjust ...
More
|
|
$709.00 - $725.00
from 5 stores

|
|
| Greenlee lee 766 Hand Crank Wire Puller |
|
Greenlee 766 Hand Crank Wire Puller ? Pull up to 1500 lbs. (6.7 kN) with only 30 lbs. (133 N) of crank handle force.? Two-speed ratchet winder for fast efficient operation.? Has 200' (61 m) of steel aircraft cable.? Completely self-contained and ready to operate.SPECIFICATIONSPulling Force: Maximum ...
More
|
|
$665.00 - $699.00
from 3 stores

|
|
| Bosch CPK60 18 18 Volt Ni Cad Cordless 6 Tool Combo Kit |
|
Kit containing 6 cordless Ni-Cad power tools for most power tool needs 18-volt hammer drill/driver, circular saw, reciprocating saw, jigsaw, planer, and flashlight Rugged, lightweight plastic casings; soft-grip handles Includes 2 batteries, 1 charger, carrying bag, hammer drill/driver, circular saw, ...
More
|
|
$569.00 - $726.00
from 6 stores

|
|
| Makita |
|
LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work with 2x more cycles. The Impact Driver is more 40% more compact, 1,280 in. lbs. of torque with 0-3,200 IPM and is 3.3lbs. The " Hammer Driver-Drill has a new 4-pole motor for 560 in. lbs. of torque & weighs only 4.9 ...
More
|
|
$536.00 - $648.00
from 2 stores

|
|
| Itw Ramset Trakfast(T) Automatic Fastening Tool |
|
TrakFast is a fully automatic tool great for high volume fastening of drywall track to concrete and steel. The TrakFast uses a 42 pin magazine allowing for increased speed and productivity on the job site. It is easy to use and does not require licensing. There is no recoil resulting in less operato ...
More
|
|
$476.00 - $712.00
from 3 stores

|
|
| Bosch CPK40 24 24 Volt Ni Cad Cordless 4 Tool Combo Kit |
|
24V Brute Tough Hammer Drill/Driver is like having three tools in one - drill, driver & hammer 24V Reciprocating Saw has a 1-1/4" stroke for fast, aggressive cuts and 3/4" stroke for plunge and precise cuts 24V 6-1/2" Circular Saw makes this kit complete 24V Flashlight perfect for any jobsite BLUECO ...
More
|
|
$585.00 - $608.00
from 3 stores

|
|