|
|
|
| Porter Cable - Cable Factory - Reconditioned 1 3/4 Peak HP Router 690LR |
|
Features 11 Amps, AC only, 27,500 RPM, 1/4" & 1/2" collets, Auto-release collet system ends "frozen" bits, Precision machined aluminum motor housing & base, Accurate micrometer depth-of-cut adjustment to 1/128, 100% sealed ball bearings, Dust-sealed switch, Lever release height adjustment, Under tab ...
More
|
|
$107.00 - $150.00
from 6 stores
|
|
| Porter Cable - Cable Laminate Trimmer 309 |
|
Features 3.8 Amps, AC/DC, 28,000 RPM, 1/4" collet, Double sealed ball bearing construction, Compact, lightweight, one-hand control, Flat top design permits safe, easy "up-right" bit changes, Non-marking plastic base offers full support. Includes Trimmer motor, Base, Wrenches #44745, Operating manual ...
More
|
|
$130.00 - $141.00
from 4 stores
|
|
| Porter Cable - Cable 1 3/4 Peak HP Variable - Speed Router with Soft Start 690LRVS |
|
Features 11 Amps, AC only, 10,000-27,500 RPM, 1/4" & 1/2" collets, Auto-release collet system ends "frozen" bits, Precision machined aluminum motor housing & base, Accurate micrometer depth-of-cut adjustment to 1/128, 100% sealed ball bearings, Dust-sealed switch, Lever release height adjustment, Un ...
More
|
|
$150.00 - $170.00
from 6 stores
|
|
| Porter Cable 6931 Plunge Router Base For 693 |
|
Adds plunging capability for safer, more convenient operation Six position depth stop allows repeatable cutting depths Fully enclosed springs ensure smooth operation through the 2-1/2-inch plunge range Compatible with motors from Porter-Cable routers 690, 9690, and 691 for versatility One Year Warra ...
More
|
|
$88.00 - $120.00
from 4 stores
|
|
| Porter Cable - Cable 1 3/4 Peak HP Router Kit 693LRPK |
|
Features 11 Amps, AC only, 27,500 RPM, 1/4" & 1/2" collets, Auto-release collet system ends "frozen" bits, Precision machined aluminum motor housing & base, Accurate micrometer depth-of-cut adjustment to 1/128, 100% sealed ball bearings, Dust-sealed switch, Lever release height adjustment, Under tab ...
More
|
|
$180.00 - $210.00
from 7 stores
|
|
| Porter Cable 3 1/4 Hp Plunge Router |
|
15A, 5 Speed, Ball Bearing 3-1/4 HP Plunge Router With Soft Start, Maintains Constant Speed Under Load, 1/2" Collet Capacity, Precision Machined Aluminum Housing Adjust Quickly & Accurately, Includes 1/2" Collet, Wrenches & Manual.
|
|
$339.00 - $359.00
from 3 stores
|
|
| Porter Cable 698 Bench Top Router Table |
|
Bench top router table with 3-5/8-inch table hole for 3-1/2-inch router bits 12-7/8-inch table legs allow for 1-1/2 to 3-1/4-horsepower routers; quick-adjust split fence design Constructed of machined-aluminum Includes table and miter gauge; router sold separately 19-3/4 by 16-3/4; 35 pounds; 1-year ...
More
|
|
$157.00 - $169.00
from 3 stores
|
|
| Porter Cable - Cable Factory - Reconditioned 1 3/4 Peak HP Variable - Speed Router Kit 694VK |
|
Features 11 Amps, AC only, 10,000-27,500 RPM, 1/4" & 1/2" collets, Auto-release collet system ends "frozen" bits, Precision machined aluminum motor housing & base, Accurate micrometer depth-of-cut adjustment to 1/128, 100% sealed ball bearings, Dust-sealed switch, Lever release height adjustment, Un ...
More
|
|
$219.00 - $230.00
from 4 stores
|
|
| Porter Cable 895PK 12 Amp 2 1/4 Horsepower Plunge Base And Fixed Base Kit With 1/4 Inch And 1/2 Inch Collets |
|
2-1/4-horsepower router combination kit with fixed base, plunge base, and height adapter Variable speed (10,000 to 23,000 rpm), soft start, table-top height adjustment Die-cast aluminum construction Includes router motor, fixed and plunge bases, 2 collets, wrench, height adjuster, two cases 22 pound ...
More
|
|
$279.00 - $280.00
from 7 stores
|
|
| Porter Cable 2 1/4 Hp Gripvac Router |
|
2-1/4 HP, Grip Vac Router, 12 AMP, 10,000-23,000 ROM, Soft Start, Dual Switch Locations, Overmold Finger Grips On Motor & Handles, Clear Sub Base With 2-1/2" Opening, Auto Spindle Lock, Micro Adjust Knob For Depth Control In 128ths Of An Inch, Quick Motor Release, Macro Height Adjustment, Removable ...
More
|
|
$216.00 - $230.00
from 4 stores
|
|
| Porter Cable 1 - 3/4" Hpfb Router with Case |
|
For the woodworker who demands precision, this heavy-duty fixed router fits the bill. A finely-tuned micrometer allows for cut adjustments in increments of 1/128 In. and an under-table stop prevents the motor from rotating out of base. There's even a dust seal on the switch to keep everything in goo ...
More
|
|
$120.00 - $170.00
from 6 stores
|
|
| Peak Hp Router With Case, 2 1/4" |
|
Soft-starting motor features full-time electronic feedback and transitions quickly between No.8901 fixed base (included), No.8931 plunge base (not included), and traditional 690 series spiral down bases (not included). Release motor, adjust bit height and clamp the motor from above the router table ...
More
|
|
$184.00 - $190.00
from 4 stores
|
|
| Porter Cable 121 6 Amp Hand Held Oscillating Spindle Sander |
|
Oscillating action sands edges aggressively without burning Variable speed 2,400 to 3,600 rpm and 38 to 60 oscillations per minute Excellent for edge sanding large materials with straight or curved edges Can be adapted for use with 698 Router Table--adapter sold separately One Year Warranty/30 Day P ...
More
|
|
$257.00 - $312.00
from 4 stores
|
|
| Porter Cable 12" Deluxe Dovetail Jig |
|
The Porter Cable 4212 Dovetail Jig is a must for any woodworker who aspires to create professional dovetails. It features patent pending alignment lines and router bit depth stop allow for quick, easy set-up. Cuts through dovetails, box joints. Tools and Hardware
|
|
$160.00 - $171.00
from 5 stores
|
|
| Porter Cable 3 1/4 Hp Bb Router |
|
15A, 5 Speed, 3-1/4 HP, Ball Bearing Router With Soft Start, Maintains Constant Speed Under Load, 1/2" Collet Capacity, Precision Machined Aluminum Housing Adjust Quickly & Accurately, Includes 1/2" Collet, Wrenches & Manual.
|
|
$349.00 - $363.00
from 5 stores
|
|
| Porter Cable 1 1/2HP D Handle Router |
|
1-1/2 HP D-Handle Router, 10A, AC Only, 23,000 RPM, 1/4" & 1/2" Collets. Auto-Release Collet System Ends "Frozen" Bits, Precision Machined Aluminum Housing & Base, Accurate Micrometer Depth-Of-Cut Adjustment, 100% Sealed Ball Bearings, Includes 1/4" & 1/2" Collets, Wrench Set & Operating Manual. *T ...
More
|
|
$159.00 - $170.00
from 4 stores
|
|
| Porter Cable 2 1/4 Hp Router Kit |
|
2-1/4 HP, Router Kit, Dual Kit With Fixed & Plunge Bases, 12 AMP, 10,000-23,000 ROM, Soft Start, Dual Switch Locations, Overmold Finger Grips On Motor & Handles, Clean Sub Base With 2-1/2" Opening, Auto Spindle Lock, Micro Adjust Knob For Depth Control In 128ths Of An Inch, Quick Motor Release, Macr ...
More
|
|
$259.00 - $260.00
from 6 stores
|
|
| Porter Cable 4210 12 Inch Dovetail Jig |
|
Will handle stock from 1/4 to 1-1/8 inch Patented alignment lines and router bit depth stop allow for quick, easy set-up Cam-type clamps with sandpaper backing provide a solid grip Will cut half-blind dovetails, rabbeted half-blind dovetails, and dovetail dadoes 1-year warranty, Manufacturer: Porter ...
More
|
|
$128.00 - $130.00
from 5 stores
|
|
