|
|
|
| Jet 708315BTC JBTS 10BT 3 15 Amp Benchtop Table Saw |
|
10-inch benchtop table saw Belt-drive operation and 15 amps; cutting capacity up to 24-1/2-inches; 5/8-inch arbor Steel corner posts; assembly required Includes saw, miter gauge, rapid wing extension, rear outfeed support, 2 wrenches for assembly 27 by 20 inch table; 62 pounds; 1-year warranty, Manu ...
More
|
|
$127.00 - $286.00
from 5 stores
|
|
| Jet Benchtop Mortiser - 708580 |
|
Jet Benchtop Mortiser - 708580 Benchtop Mortiser Features Powerful 1/2HP TEFC motor for solid performance and trouble free operation Heavy-duty cast iron and steel construction for durability and stability Three-jaw drill chuck with extended chuck key for positive grip on mortise bit Rack-and-pi ...
More
|
|
$269.00 - $380.00
from 4 stores
|
|
| Jet Benchtop Edge Banner - 708000 |
|
Jet Benchtop Edge Banner - 708000 Benchtop Edge Banner The JET Edge Bander features light, durable construction with adjustable, non-skid rubber feet. Infinitely adjustable electronically controlled heating element. This variation in heat allows for use of a wider variety of edgebanding material ...
More
|
|
$345.00 - $370.00
from 1 store
|
|
| Jet JBG - 8A 8" Bench Grinder |
|
Heavy-duty guarded toggle switch on 8" and 10" Pre-lubricated and enclosed ball bearings Cast iron wheel guards and dust vents One-piece quick adjusting spark guards Large eye shields with quick adjustment, Manufacturer: JET
|
|
$180.00 - $300.00
from 4 stores
|
|
| Jet 2 - 1/2" X 15 - 3/4" Straight Line Sander - JSG - 0430 |
|
2-1/2" x 15-3/4" Straight Line Sander Product Features Heavy-duty balanced ball bearing construction Built-in regulator for positive speed control on models JSG-0402 JSG-0404 JSG-0420 and JSG-0414 Dynamic counterweight vibration isolators for low vibration sanding Model JSG-0430 straight line sander ...
More
|
|
$120.00 - $161.00
from 2 stores
|
|
| FP4022 00L 3/4HP Shwl Jet Pump |
|
Self-priming afte pump housing initially filled Pre-set pressure switch to 30-50 psi setting Pressure shut-off at 78 psi 115/230 volts TC2104 pressure gauge recommended, Weight: 29 lbs., Manufacturer: FLOTEC INC
|
|
$202.00 - $225.00
from 2 stores
|
|
| Jet Tenoning Jig for Tablesaws - 708295 |
|
Jet Tenoning Jig for Tablesaws - 708295 Tenoning Jig for Tablesaws Features Fully adjustable stops secure stock when cutting angled tenons T-slot miter bar has removable "T" for added versatility Holds boards on end to easily cut tenons Fits left and right-tilt saws with 3/8" and 3/4" miter guag ...
More
|
|
$110.00 - $114.00
from 2 stores
|
|
| Jet 7" Angle Polisher - JSG - 0472 |
|
7" Angle Polisher Product Features Heavy-duty balanced ball bearing construction Dead handle that mounts for left or right hand operation Muffled exhaust for quiet operation Built-in regulator for positive speed control Geared lower for polishing applications Product Specifications Model No JSG-0472 ...
More
|
|
$150.00 - $160.00
from 2 stores
|
|
| Jet 54,000 Rpm Micro Air Grinder - JSM - 516N |
|
54 000 RPM Micro Air Grinder Product Features Lightweight yet powerful and compact design Heavy-duty ball bearing construction for vibration-free performance Durable precision machined and hardened steel gears Variable speed throttle control with self-closing lever Front exhaust on JSM-501 and MG-1B ...
More
|
|
$95.00 - $105.00
from 2 stores
|
|
| Jet 3/8" Air Ratchet Wrench - JSM - 30 |
|
3/8" Air Ratchet Wrench Product Features Steel spring ball retainers for rapid socket changing Variable speed lever throttle for better speed control Hardened steel gears for long tool life Ball bearing construction throughout Product Specifications Model No JSM-30 Square Drive in 3/8 Bolt Capacity ...
More
|
|
$50.00 - $75.00
from 3 stores
|
|
| Jet 1/2" Impact Wrench - JSG - 0717SH |
|
1/2" Impact Wrench Product Features Built-in air regulator for positive speed and torque control Ring socket retainers for rapid socket changing Front and/or rear bumper guards For all models air inlet NPT is 1/4" and air hose size ID is 3/8" Air pressure for all models is 90 PSI Models JSM-401 JSM- ...
More
|
|
$130.00 - $140.00
from 2 stores
|
|
| Jet 3/4" Impact Wrench - JSG - 0751SH |
|
3/4" Impact Wrench Product Features Built-in air regulator for positive speed and torque control Ring socket retainers for rapid socket changing Front and/or rear bumper guards For all models air inlet NPT is 1/4" and air hose size ID is 3/8" Air pressure for all models is 90 PSI Models JSM-401 JSM- ...
More
|
|
$290.00 - $320.00
from 2 stores
|
|
